ImmersionRC EZ UHF TUNED TX
Get an alert when the product is in stock:
TUNED VERSION ONLY!
We have decided that we will now only offer the TUNED version of the EZUHF Tx. Why? Because it's simply better!
This transmitter is modified to support lower voltage input voltage and at the same time boost your output power. The new supported input power is 6.6 to 12.6V. The voltage is no longer proportional to the output power.
It also removes a component that has seen failures which would reduce the output power to a fraction of what is normal. This maximizes the reliability of your EzUHF Tx.
Warning: The modification impairs the bi-directional functionality (which is not being used currently).
A magnificent piece of engineering, a must-have for the serious FPV or UAV pilot. Couple with one of our receiver modules, for a reliable long-range FHSS control link.
The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by the EzUHF transmitter, so any radio can be used with your TrackR2 now. Support for any radio battery voltage is guaranteed as well, as the EzUHF transmitter has a power-in jack which will accept a 3S LiPo, so no soldering in your precious RC transmitter is required. For Futaba systems using a 9.6V battery or 3S LiPo the EzUHF transmitter can be powered directly from it, with just a single cable. The battery voltage, either from the external battery, or provided by the radio, obviously is monitored and an audible alarm will sound when the battery gets low.
Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
-433MHz/70cm Ham band operation
-600mW (~28dBm) output power
-Direct head-tracker input, adding head-tracker compatibility to most radios
-Power switch, boost power when at long range
-Standard SMA antenna connector, compatibility with 70cm antennas
-Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
-Standard USB port (Mini-A) for firmware upgrades, and system configuration
-Single pushbutton learning of failsafe positions
-Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx
-Mates with 8 channel, and 4 channel EzUHF receivers
-Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
-Built in receiver, for future expansion
-Custom extruded brushed aluminum enclosure
NOTE *** ANTENNAS NOW INCLUDED!. ***
Notice: The use and operation of this product in the Australia and many other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that you comply with the rules and regulations regarding radio transmitters in your country. Mongrel Gear is not responsible for your actions if you choose to use this product.